| |
|
| YC25-2 |
 |
|
| |
|
| |
YC25 hydraulic backhoe excavators utilize "Servo Hydraulic Pilot device" and have the functions of stone-breaking, digging, and grabbing shoveling, drilling and bulldozing. The excavator can move with rubber crawlers and its working platform can rotate 360 degrees. It's reliable, user-friendly and compact of high quality & high-efficiency. Our excavators have been widely used in erection of buildings and wooden land, municipal engineering, construction of water supply, gas, heating and telecommunications, construction on
| Basic Dimension of YC25-2 |
| |
|
|
YC25-2 |
| Code |
Item |
Units |
825 |
825A |
| |
Machine Weight |
Kg |
2820 |
3080 |
| |
Volume of Backhoe |
m3 |
0.07 |
0.07 |
| |
Engine |
|
Cummins A1400 |
| |
Power of engine |
KW/rpm |
22/2300 |
| A |
Overall Length (trans pos) |
mm |
4510 |
4510 |
| B |
Overall Height (trans pos) |
mm |
2395 |
2395 |
| C |
Width of Undercarriage |
mm |
1450 |
1450 |
| D |
Width of Track |
mm |
300 (Rubber/Steel) |
| E |
Maximum Platform Tail Turning Radius |
mm |
1346 |
1346 |
| F |
Length of Track |
mm |
1935 |
1935 |
| G |
Sprocket to idler centres |
mm |
1455 |
1455 |
| H |
Dist. between Undercarriage and Ground |
mm |
292 |
292 |
| I |
Dist. Between boom and ground |
mm |
1409 |
1409 |
| J |
Width of Platform |
mm |
1444 |
1444 |
| K |
Dist. Between Hood and Ground |
mm |
1375 |
1375 |
| L |
Dist. Between Platform and Ground |
mm |
563 |
563 |
| |
Outer Width of Bucket |
mm |
517 |
517 |
| |
Travelling Speed |
Km/h |
2.4/4.2 |
2.4/4.2 |
| |
Swing Speed of Platform |
rpm |
10~12 |
10~12 |
| |
Cabin |
|
|
¢ |
| |
Canopy |
|
¢ |
|
| |
Swing Angularity of the Digging Arm (L/R) |
＜ |
80/50 |
80/50 |
| Range of Operation |
|
|
|
|
|
| |
|
|
YC25-2 |
| Code |
Item |
Units |
825 |
825A |
| A |
Maximum Digging Height |
mm |
4205 |
| B |
Maximum Dumping Height |
mm |
2840 |
| C |
Maximum Digging Depth |
mm |
2610 |
| D |
Maximum Digging Radius |
mm |
4610 |
| D1 |
Maximum Digging Dist.of Ground |
mm |
4487 |
| E |
Maximum Height Digging Radius |
mm |
2957 |
| F |
Minimum Platform Tail Turning Radius |
mm |
1856 |
| G |
Maximum Depth for Bulldozing |
mm |
372 |
| H |
Maximum Height for Bulldozing |
mm |
262 |
| |
Maximum Digging Force |
kN |
17.4 |
|
|
|
|
|
| Notice: The above dimension is the nominal data only, and we have the right to change them without prior notice. | Basic Dimension
Range of Operation
 |
|
| |
|
|
|
|
